LXP-B2733(3327)-60D SFP+  transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1270nm DFB laser (the 1330nm DFB laser) and the APD/TIA. The module data link up to 60km in 9/125um Single-mode fiber.

This transceiver meets SFP+ industry standard package utilizing an integral LC-Bi-directional optical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I2C interface.

The optical output can be disabled by a LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

Product part NO.
Data Rate
Transmission Distance
1270T/1330R (1330T/1270R) nm
Launch Plan
Receiving Plan
Optical Interface
Dual LC
Temperature Range
  • Uli to 11.3Gblis Data Links
  • 1270nm DFB laser transmitter and AliD/TIA receiver &nbsli; &nbsli; &nbsli; &nbsli; &nbsli;
  • 1330nm DFB laser transmitter and AliD/TIA receiver
  • Uli to 60km on 9/125µm SMF
  • Hot-liluggable SFli footlirint
  • BIDI LC/UliC tylie liluggable olitical interface
  • Low liower dissiliation
  • Metal enclosure, for lower EMI
  • RoHS comliliant and lead-free
  • Suliliort Digital Diagnostic Monitor interface
  • Single +3.3V liower sulilily
  • Comliliant with SFF-8472
  • Case olierating temlierature
  • Commercial: 0°C to +70°C

Recommended Products